Disability Ramp Installation

Disability Ramp Installation

Handrails and Grab Rails

External and internal handrails for ramps, steps and paths, fitted at the right height for safe support.

Free Disability Ramp Installation quote

No obligation. We only use your details to reply about this job.

Handrails and Grab Rails — Disability Ramp Installation

What's involved

Good handrails make ramps and steps usable for people who walk with difficulty, not just wheelchair users. External handrails are usually galvanised or powder-coated steel, aluminium or stainless steel, fixed to walls with brackets or set into concrete with posts. They should be continuous, easy to grip and extend beyond the top and bottom of the slope so the user is supported before and after the incline. Contrasting colours help people with sight loss. The installer checks the walls or ground can take the fixings, uses suitable anchors for masonry, and sets the rails at a consistent height. Grab rails beside front doors and at steps are often fitted at the same time. Many projects combine a new ramp with rails at the back door, garden steps and inside the hallway in one visit.

How we handle it

  1. Tell us about the access need

    Use the quote form to describe the entrance, the number and height of steps, who will use the ramp, whether they use a manual or powered wheelchair, and whether an occupational therapist has assessed the need.

  2. Survey and measurement

    A local installer measures the total rise, available space, ground conditions, door widths and opening direction, then explains gradient options and where landings and handrails will be needed.

  3. Design and quote

    You receive a drawing or sketch showing the ramp layout, gradient, landings and rails, plus an itemised quote. The installer flags any planning or permission issues and can provide paperwork for council grant applications.

  4. Installation

    Modular ramps are usually installed in a day. Permanent ramps involve groundwork, building and curing over several days, with temporary access maintained where possible so the user is not cut off.

  5. Handover and safety check

    The installer checks every joint, rail and surface, walks the route with the user where possible, and explains care and maintenance such as keeping the surface clear of leaves, moss and ice.

Price guide

Ramp prices depend mainly on the height being overcome, because a higher rise needs a longer ramp, more landings and more handrails. Modular ramps are usually quicker and cheaper to install than permanent ramps, but both depend on site conditions. These are typical UK guide prices for 2026. Some people qualify for help through a council Disabled Facilities Grant.

  • Permanent concrete or brick ramp: £2,500–£8,000. Includes groundwork, edges, slip-resistant surface, drainage and handrails.
  • Modular aluminium ramp, two or three steps: £2,000–£5,000. Longer run with landings and handrails both sides; layout affects the price.
  • Modular aluminium ramp, single step: £800–£1,800. Short ramp with handrails and top landing for a rise of around 150mm to 200mm.

Questions about handrails and grab rails

Does a wheelchair ramp need handrails?

Handrails are strongly recommended on most ramps and are expected on both sides of ramps in non-domestic buildings under Approved Document M guidance. They help people who walk with difficulty, give support on slopes and prevent falls. Short threshold ramps generally do not need handrails, but longer ramps almost always benefit from them.

Get a free disability ramp installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote